|
|
100%
Dimethylpolysiloxane
Nonpolar
Excellent general
purpose column
Wide range of
applications
Low bleed
High temperaure
limit
Bonded and
cross-linked
Solvent rinsable
Wide range of
column dimensions available
Equivalent to USP
Phase G2
Test Mix:
Microbore
(0.05-0.10 mm I.D.) P/N: 200-0010
Capillary (0.18-0.32 mm I.D.) P/N: 200-0310
Megabore (0.45-0.53 mm I.D.) P/N: 200-0110
Certain thick film or thin film configurations require different test mixtures than those listed above. Please call J&W Technical Support for specific test mix information.
Similar Phases:
HP-1, HP-101,
Ultra-1, SPB-1, CP-Sil 5CB, RSL-150,
RSL-160, Rtx-1, BP-1, CB-1, OV-1, PE-1, 007-1(MS),
SP-2100, SE-30, RH-1, CC-1, CP-Sil 5CB MS, ZB-1
Inner Diameter |
Length |
Film |
Temperature |
Part Number |
0.05 |
10 |
0.05 |
-60 to 325/350 |
126-1012 |
0.05 |
10 |
0.20 |
-60 to 325/350 |
126-1013 |
0.1 |
5 |
0.12 |
-60 to 325/350 |
127-100A |
0.1 |
10 |
0.10 |
-60 to 325/350 |
127-1012 |
0.1 |
10 |
0.12 |
-60 to 325/350 |
127-101A |
0.1 |
10 |
0.40 |
-60 to 325/350 |
127-1013 |
0.1 |
20 |
0.10 |
-60 to 325/350 |
127-1022 |
0.1 |
20 |
0.40 |
-60 to 325/350 |
127-1023 |
0.1 |
40 |
0.20 |
-60 to 325/350 |
127-1046 |
0.1 |
40 |
0.40 |
-60 to 325/350 |
127-1043 |
0.15 |
10 |
0.12 |
-60 to 325/350 |
12A-1012 |
0.15 |
10 |
1.20 |
-60 to 300/320 |
12A-1015 |
0.15 |
25 |
0.12 |
-60 to 325/350 |
12A-1022 |
0.15 |
25 |
1.20 |
-60 to 300/320 |
12A-1025 |
0.18 |
10 |
0.18 |
-60 to 325/350 |
121-1012 |
0.18 |
10 |
0.20 |
-60 to 325/350 |
121-101A |
0.18 |
10 |
0.40 |
-60 to 325/350 |
121-1013 |
0.18 |
20 |
0.18 |
-60 to 325/350 |
121-1022 |
0.18 |
20 |
0.20 |
-60 to 325/350 |
121-102A |
0.18 |
20 |
0.40 |
-60 to 325/350 |
121-1023 |
0.18 |
40 |
0.20 |
-60 to 325/350 |
121-104A |
0.18 |
40 |
0.40 |
-60 to 325/350 |
121-1043 |
0.2 |
12 |
0.33 |
-60 to 325/350 |
128-1012 |
0.2 |
15 |
0.20 |
-60 to 325/350 |
128-10H7 |
0.2 |
15 |
0.80 |
-60 to 325/350 |
128-10H4 |
0.2 |
25 |
0.11 |
-60 to 325/350 |
128-1021 |
0.2 |
25 |
0.33 |
-60 to 325/350 |
128-1022 |
0.2 |
25 |
0.50 |
-60 to 325/350 |
128-1023 |
0.2 |
30 |
0.20 |
-60 to 325/350 |
128-1037 |
0.2 |
30 |
0.80 |
-60 to 325/350 |
128-1034 |
0.2 |
50 |
0.11 |
-60 to 325/350 |
128-1051 |
0.2 |
50 |
0.33 |
-60 to 325/350 |
128-1052 |
0.2 |
50 |
0.50 |
-60 to 325/350 |
128-1053 |
0.2 |
60 |
0.20 |
-60 to 325/350 |
128-1067 |
0.2 |
60 |
0.80 |
-60 to 325/350 |
128-1064 |
0.25 |
10 |
0.12 |
-60 to 325/350 |
122-10H7 |
0.25 |
15 |
0.10 |
-60 to 325/350 |
122-1011 |
0.25 |
15 |
0.25 |
-60 to 325/350 |
122-1012 |
0.25 |
15 |
0.50 |
-60 to 325/350 |
122-101E |
0.25 |
15 |
1.00 |
-60 to 325/350 |
122-1013 |
0.25 |
25 |
0.12 |
-60 to 325/350 |
122-1027 |
0.25 |
25 |
0.25 |
-60 to 325/350 |
122-1022 |
0.25 |
25 |
0.40 |
-60 to 325/350 |
122-102A |
0.25 |
25 |
1.20 |
-60 to 300/320 |
122-102C |
0.25 |
30 |
0.10 |
-60 to 325/350 |
122-1031 |
0.25 |
30 |
0.25 |
-60 to 325/350 |
122-1032 |
0.25 |
30 |
0.50 |
-60 to 325/350 |
122-103E |
0.25 |
30 |
1.00 |
-60 to 325/350 |
122-1033 |
0.25 |
50 |
0.12 |
-60 to 325/350 |
122-1057 |
0.25 |
50 |
0.25 |
-60 to 325/350 |
122-1052 |
0.25 |
50 |
0.40 |
-60 to 325/350 |
122-105A |
0.25 |
60 |
0.10 |
-60 to 325/350 |
122-1061 |
0.25 |
60 |
0.25 |
-60 to 325/350 |
122-1062 |
0.25 |
60 |
0.50 |
-60 to 325/350 |
122-106E |
0.25 |
60 |
1.00 |
-60 to 325/350 |
122-1063 |
0.25 |
100 |
0.25 |
-60 to 325/350 |
122-10A2 |
0.25 |
100 |
0.50 |
-60 to 325/350 |
122-10AE |
0.25 |
100 |
1.00 |
-60 to 325/350 |
122-10A3 |
0.25 |
100 |
0.50 |
-60 to 325/350 |
122-10A6 |
0.25 |
105 |
0.10 |
-60 to 325/350 |
122-10B1 |
0.25 |
105 |
0.25 |
-60 to 325/350 |
122-10B2 |
0.25 |
105 |
0.50 |
-60 to 325/350 |
122-10BE |
0.25 |
105 |
1.00 |
-60 to 325/350 |
122-10B3 |
0.25 |
150 |
1.00 |
-60 to 325/350 |
122-10G3 |
0.32 |
10 |
0.12 |
-60 to 325/350 |
123-10H7 |
0.32 |
10 |
0.25 |
-60 to 325/350 |
123-1002 |
0.32 |
10 |
1.20 |
-60 to 300/320 |
123-10HC |
0.32 |
15 |
0.10 |
-60 to 325/350 |
123-1011 |
0.32 |
15 |
0.25 |
-60 to 325/350 |
123-1012 |
0.32 |
15 |
0.50 |
-60 to 325/350 |
123-101E |
0.32 |
15 |
1.00 |
-60 to 325/350 |
123-1013 |
0.32 |
15 |
1.50 |
-60 to 300/320 |
123-101B |
0.32 |
15 |
3.00 |
-60 to 280/300 |
123-1014 |
0.32 |
15 |
5.00 |
-60 to 280/300 |
123-1015 |
0.32 |
25 |
0.12 |
-60 to 325/350 |
123-1027 |
0.32 |
25 |
0.17 |
-60 to 325/350 |
123-102D |
0.32 |
25 |
0.25 |
-60 to 325/350 |
123-1022 |
0.32 |
25 |
0.40 |
-60 to 325/350 |
123-102A |
0.32 |
25 |
0.52 |
-60 to 325/350 |
123-1026 |
0.32 |
25 |
1.05 |
-60 to 325/350 |
123-102F |
0.32 |
25 |
1.20 |
-60 to 300/320 |
123-102C |
0.32 |
25 |
5.00 |
-60 to 280/300 |
123-1025 |
0.32 |
30 |
0.10 |
-60 to 325/350 |
123-1031 |
0.32 |
30 |
0.25 |
-60 to 325/350 |
123-1032 |
0.32 |
30 |
0.50 |
-60 to 325/350 |
123-103E |
0.32 |
30 |
1.00 |
-60 to 325/350 |
123-1033 |
0.32 |
30 |
1.50 |
-60 to 300/320 |
123-103B |
0.32 |
30 |
2.00 |
-60 to 280/300 |
123-103G |
0.32 |
30 |
3.00 |
-60 to 280/300 |
123-1034 |
0.32 |
30 |
4.00 |
-60 to 280/300 |
123-1038 |
0.32 |
30 |
5.00 |
-60 to 280/300 |
123-1035 |
0.32 |
50 |
0.12 |
-60 to 325/350 |
123-1057 |
0.32 |
50 |
0.17 |
-60 to 325/350 |
123-105D |
0.32 |
50 |
0.25 |
-60 to 325/350 |
123-1052 |
0.32 |
50 |
0.40 |
-60 to 325/350 |
123-105A |
0.32 |
50 |
0.52 |
-60 to 325/350 |
123-1056 |
0.32 |
50 |
1.05 |
-60 to 325/350 |
123-105F |
0.32 |
50 |
1.20 |
-60 to 300/320 |
123-105C |
0.32 |
50 |
5.00 |
-60 to 280/300 |
123-1055 |
0.32 |
60 |
0.10 |
-60 to 325/350 |
123-1061 |
0.32 |
60 |
0.25 |
-60 to 325/350 |
123-1062 |
0.32 |
60 |
0.50 |
-60 to 325/350 |
123-106E |
0.32 |
60 |
1.00 |
-60 to 325/350 |
123-1063 |
0.32 |
60 |
1.50 |
-60 to 300/320 |
123-106B |
0.32 |
60 |
2.00 |
-60 to 280/300 |
123-106G |
0.32 |
60 |
3.00 |
-60 to 280/300 |
123-1064 |
0.32 |
60 |
5.00 |
-60 to 280/300 |
123-1065 |
0.32 |
100 |
0.25 |
-60 to 325/350 |
123-10A2 |
0.32 |
100 |
1.00 |
-60 to 325/350 |
123-10A3 |
0.32 |
105 |
0.10 |
-60 to 325/350 |
123-10B1 |
0.32 |
105 |
0.25 |
-60 to 325/350 |
123-10B2 |
0.32 |
105 |
0.50 |
-60 to 325/350 |
123-10BE |
0.32 |
105 |
1.00 |
-60 to 325/350 |
123-10B3 |
0.32 |
105 |
1.50 |
-60 to 300/320 |
123-10BB |
0.32 |
105 |
3.00 |
-60 to 280/300 |
123-10B4 |
Inner Diameter |
Length |
Film Thickness |
Temperature Limits |
Part Number |
0.45 |
5 |
4.25 |
-60 to 260/280 |
124-1005* |
0.45 |
15 |
0.13 |
-60 to 340/360 |
124-1011* |
0.45 |
15 |
0.42 |
-60 to 300/320 |
124-1017* |
0.45 |
15 |
1.27 |
-60 to 300/320 |
124-1012* |
0.45 |
15 |
2.55 |
-60 to 260/280 |
124-1014* |
0.45 |
15 |
4.25 |
-60 to 260/280 |
124-1015* |
0.45 |
30 |
0.42 |
-60 to 300/320 |
124-1037* |
0.45 |
30 |
1.27 |
-60 to 300/320 |
124-1032* |
0.45 |
30 |
2.55 |
-60 to 260/280 |
124-1034* |
0.45 |
30 |
4.25 |
-60 to 260/280 |
124-1035* |
0.45 |
60 |
1.27 |
-60 to 300/320 |
124-1062* |
0.45 |
105 |
2.55 |
-60 to 260/280 |
124-10A4* |
| * No special ferrules required for High Speed Megabore 0.45mm I.D. columns | ||||
0.53 |
5 |
2.65 |
-60 to 260/280 |
125-100B |
0.53 |
5 |
5 |
-60 to 260/280 |
125-1005 |
0.53 |
7.5 |
5 |
-60 to 260/280 |
125-10J5 |
0.53 |
10 |
0.5 |
-60 to 300/320 |
125-10H7 |
0.53 |
10 |
0.88 |
-60 to 300/320 |
125-10HD |
0.53 |
10 |
1 |
-60 to 300/320 |
125-10HJ |
0.53 |
10 |
2 |
-60 to 280/300 |
125-10H3 |
0.53 |
10 |
2.65 |
-60 to 260/280 |
125-10HB |
0.53 |
10 |
5 |
-60 to 260/280 |
125-10H5 |
0.53 |
15 |
0.1 |
-60 to 340/360 |
125-1019 |
0.53 |
15 |
0.15 |
-60 to 340/360 |
125-1011 |
0.53 |
15 |
0.25 |
-60 to 320/340 |
125-101K |
0.53 |
15 |
|||