|
DB-FFAP
- Nitroterephthalic
acid modified polyethylene glycol
- High
polarity
- Designed
for the analysis of volatile fatty acids and
phenols
- Replaces
OV-351
- Bonded and
cross-linked
- Solvent
rinsable
- Close
equivalent to USP Phase G35
J&W does not recommend the use
of water or methanol to rinse
DB-FFAP GC columns.
|
Test Mix:
Capillary (0.18-0.32 mm
I.D.) P/N: 200-0032
Megabore (0.45-0.53 mm I.D.) P/N: 200-0132
Certain thick film or thin film
configurations require different test mixtures than those listed
above.
Please call J&W Technical Support for specific test mix
information.
Similar Phases:
Stabilwax-DA, HP-FFAP, PE-FFAP Nukol,
007-FFAP, BP21, CP-FFAP-CB
DB-FFAP
Order Guide:
Inner
Diameter
(mm I.D.)
|
Length
(meter)
|
Film
Thickness
(µm)
|
Temperature
Limits (°C)
|
Part
Number
|
0.20
|
25
|
0.30
|
40 to 250
|
128-3222
|
0.20
|
50
|
0.30
|
40 to 250
|
128-3252
|
0.25
|
15
|
0.10
|
40 to 250
|
122-3211
|
0.25
|
15
|
0.25
|
40 to 250
|
122-3212
|
0.25
|
15
|
0.50
|
40 to 250
|
122-3213
|
0.25
|
30
|
0.10
|
40 to 250
|
122-3231
|
0.25
|
30
|
0.25
|
40 to 250
|
122-3232
|
0.25
|
30
|
0.50
|
40 to 250
|
122-3233
|
0.25
|
60
|
0.10
|
40 to 250
|
122-3261
|
0.25
|
60
|
0.25
|
40 to 250
|
122-3262
|
0.25
|
60
|
0.50
|
40 to 250
|
122-3263
|
0.32
|
15
|
0.10
|
40 to 250
|
123-3211
|
0.32
|
15
|
0.25
|
40 to 250
|
123-3212
|
0.32
|
15
|
0.50
|
40 to 250
|
123-3213
|
0.32
|
15
|
1.00
|
40 to 250
|
123-3214
|
0.32
|
25
|
0.50
|
40 to 250
|
123-3223
|
0.32
|
30
|
0.10
|
40 to 250
|
123-3231
|
0.32
|
30
|
0.25
|
40 to 250
|
123-3232
|
0.32
|
30
|
0.50
|
40 to 250
|
123-3233
|
0.32
|
30
|
1.00
|
40 to 250
|
123-3234
|
0.32
|
50
|
0.50
|
40 to 250
|
123-3253
|
0.32
|
60
|
0.10
|
40 to 250
|
123-3261
|
0.32
|
60
|
0.25
|
40 to 250
|
123-3262
|
0.32
|
60
|
0.50
|
40 to 250
|
123-3263
|
0.32
|
60
|
1.00
|
40 to 250
|
123-3264
|
0.45
|
15
|
0.85
|
40 to 250
|
124-3212*
|
0.45
|
30
|
0.85
|
40 to 250
|
124-3232*
|
0.53
|
10
|
1.00
|
40 to 250
|
125-32H2
|
0.53
|
15
|
0.10
|
40 to 250
|
125-3219
|
0.53
|
15
|
0.25
|
40 to 250
|
125-3211
|
0.53
|
15
|
0.50
|
40 to 250
|
125-3217
|
0.53
|
15
|
1.00
|
40 to 250
|
125-3212
|
0.53
|
15
|
1.50
|
40 to 250
|
125-3213
|
0.53
|
30
|
0.10
|
40 to 250
|
125-3239
|
0.53
|
30
|
0.25
|
40 to 250
|
125-3231
|
0.53
|
30
|
0.50
|
40 to 250
|
125-3237
|
0.53
|
30
|
1.00
|
40 to 250
|
125-3232
|
0.53
|
30
|
1.50
|
40 to 250
|
125-3233
|
0.53
|
60
|
0.10
|
40 to 250
|
125-3269
|
0.53
|
60
|
0.25
|
40 to 250
|
125-3261
|
0.53
|
60
|
0.50
|
40 to 250
|
125-3267
|
0.53
|
60
|
1.00
|
40 to 250
|
125-3262
|
0.53
|
60
|
1.50
|
40 to 250
|
125-3263
|
| * No special
ferrules required for High Speed Megabore 0.45 mm
I.D. columns |
Click here to return to the Fused Silica Product Page

click here to return to the home page
|