GS-molesieve

A PLOT column for the analysis of permanent gases
O2, N2, CO and CH4 resolve in less than 5 minutes
Durable molecular sieve 5Å coating minimizes baseline spiking and damage to multiport valves

Molecular sieve columns have a tendency to adsorb water which, over time, results in changes in retention time. J&W uses an advanced, proprietary deactivation process which allows for rapid regeneration. Fully saturated GS-Molesieve columns fully regenerate in 7 hours or less at 200°C.

Test Mix:
Test mixtures for J&W PLOT columns are specially produced mixtures of light gases.

Similar Phases:
Molesieve 5Å, PLT-5A, Rt-Msieve 13X

**GS-Molesieve Order Guide:**
Inner Diameter (mm I.D.)	Length (meter)	Film Thickness (µm)	Temperature Limits (°C)	Part Number
0.53	30	N/A	-60 to 300	115-3632
* -60°C is the lowest temperature used on this phase in our lab. Lower temperatures may be used depending on the sample.

Click here to return to the Fused Silica Product Page

click here to return to the home page