SE Series GC Columns

SE-30: (100% Dimethylpolysiloxane)
SE-52: (5%-Phenyl)-methylpolysiloxane
SE-54: (5%-Phenyl)(1%-Vinyl)-methylpolysiloxane

Because SE series GC columns are not bonded or cross-linked,
J&W does not recommend solvent rinsing.

Test Mix:
SE-30 Part Number: 200-0010
SE-52 Part Number: 200-0010
SE-54 Part Number: 200-0010

Certain thick film or thin film configurations require different test mixtures than those listed above.
Please call J&W Technical Support for specific test mix information.

**SE-30 Order Guide:**
Inner Diameter (mm I.D.)	Length (meter)	Film Thickness (µm)	Temperature Limits (°C)	Part Number
0.25	15	0.25	0 to 325/350	112-3012
0.25	30	0.25	0 to 325/350	112-3032
0.25	60	0.25	0 to 325/350	112-3062
0.32	15	0.25	0 to 325/350	113-3012
0.32	30	0.25	0 to 325/350	113-3032
0.32	60	0.25	0 to 325/350	113-3062
*DB-1 is a bonded replacement for SE-30*

**SE-52 Order Guide:**
Inner Diameter (mm I.D.)	Length (meter)	Film Thickness (µm)	Temperature Limits (°C)	Part Number
0.25	15	0.25	0 to 325/350	112-5212
0.25	30	0.25	0 to 325/350	112-5232
0.25	60	0.25	0 to 325/350	112-5262
0.32	15	0.25	0 to 325/350	113-5212
0.32	30	0.25	0 to 325/350	113-5232
0.32	60	0.25	0 to 325/350	113-5262
*DB-5 is a bonded replacement for SE-52*

**SE-54 Order Guide:**
Inner Diameter (mm I.D.)	Length (meter)	Film Thickness (µm)	Temperature Limits (°C)	Part Number
0.25	15	0.25	0 to 325/350	112-5412
0.25	30	0.25	0 to 325/350	112-5432
0.25	60	0.25	0 to 325/350	112-5462
0.32	15	0.25	0 to 325/350	113-5412
0.32	30	0.25	0 to 325/350	113-5432
0.32	30	0.32	0 to 325/350	113-5436
0.32	30	1.00	0 to 325/350	113-5433
0.32	60	0.25	0 to 325/350	113-5462
0.53	15	0.50	0 to 325/350	115-5417
*DB-5 is a bonded replacement for SE-54*

Click here to return to the Fused Silica Product Page

click here to return to the home page