• Instant access to injection port liner

• Cuts liner replacement time to as little as 30 seconds!

• No more frustrating searches for special tools

• Improved inlet ergonomics – No more handling of heated parts, no more burns or scrapes

• Decreased downtime = Increased productivity

• Installs easily in 15 minutes!

Agilent's new Flip Top Inlet Sealing System is a device designed to allow the user of Agielnt's GC's to safely and reliably change an inlet liner in as little as 30 seconds without any tools in a consistent leak-free manner. No longer will you have to contend with frustrating searches for special wrenches or burn your fingers on hot inlets. 

The Flip Top has a levered arm that attaches to any 6890/6850/5890 insert weldment and locks to the injection port using an adapter ring screwed onto the inlet.  Once installed, simply lift the arm of the Flip Top which releases the insert weldment from the injection port, and allows instant access to the liner. The process is simply reversed to re-seal the weldment to the port.

The inlet liner fluoropolymer O-rings used with the Flip Top are larger than our standard liner O-rings and will need to be replaced at similar intervals. Two O-rings are supplied with the kit, we recommend to keep a couple of spares on hand.

The Flip Top Inlet Sealing System is compatible with inlet temperatures up to 350°C. Warranty: 90 day replacement by factory.

Flip Top Inlet Sealing System Ordering Information

Description