96M-04100PT - 1.0mL Multi-Tier, PP Conical Ins, Topas Plate

This Multi-Tier™ Plate is a patented modular, reusable system featuring a 96-well base plate securing 1.0mL conical polypropylene inserts. With the removal or addition of spacers (96M-11T), this reusable system can be used with other volume inserts (0.5mL, 1.5mL, or 2.0mL).

The vented design of the base plate assures uniform heating and cooling when immersed in a water bath. The cover locks the liner in place and prevents vial pullout. The prescored PTFE/Silicone/PTFE liner permits easy needle penetration, while the optional Molded PTFE/Silicone liner (96M-16) locks into each of the 96 vials and reseals after multiple injections thus reducing the chance of solvent evaporation and cross contamination.

• Standard 8x12 (96-well) footprint with an alphanumeric grid.
• Includes 1.0mL Polypropylene (PP) Conical Vials 
• Secure fit of the vials in the baseplate permit use with shaker and vortex mixers during sample preparations.
• Compatible with all autosamplers and robotic liquid handling systems.
• Replacement Inserts in simple Vial Loader Packaging so user can load all 96 inserts in a single motion.

To use the Vial Loader in the Multi-Tier™ Plate

1. Peel away the packaging and place an empty base plate on top of the vial loader.
2. Invert the entire unit, the plate is ready to use!

Vial loader inserts are availabe in a variety of volumes (0.5mL, 1.0mL, 1.5mL, or 2.0mL). Glass or polypropylene with either a conical or flat bottom.

Why Use Polypropylene Inserts in a 96-Well Plate Format?

• Easy removal of sample from plate (removing insert)
• Minimize waste with radioactive/hazardous samples

What is a Topas Plate?

Plates manufactured in Topas (COC - Cyclic Olefin Copolymers) have excellent clarity and heat/chemical resistance. The plates can be autoclaved and sterilized, are heat resistant to 70º C, and are UV transparent down to 300nm. If your application is going above 70° C, then, we would recommend the Aluminum base plate system.