MiniSeal II Semi-Automatic Plate Heat Sealer

  • Semi-automatic heat applied plate sealing system
  • Seal SBS format micro well plates and tubes
  • Seal time from 0.1 – 9.9 seconds, up to 200 °C
  • Safe, simple slide operation
  • No compressed air required
  • For use with raised rim plate

The new MiniSeal II semi-automatic plate heat sealer builds on the reputation of our earlier Miniseal design for robustness and an ability to seal most types of plates. For users who need a tight seal on deep well plates, conventional sealers may not offer sufficient down force to guarantee a good seal.

The sealing process is started by setting the plate and thermal seal in the drawer and pushing it fully into the unit. Once the drawer is pushed in, it will auto latch and the screen will display a sealing message, you may now release your grip on the handle. When the seal has finished, the drawer will automatically open, presenting the sealed plate for removal.

With powerful stepper motor control and a mighty 450 watts of heating power available, the new MiniSeal II copes effortlessly with PCR, filter-bottomed, assay and deep well plates, EVEN if the plate itself is distorted or bowed. Easy to set up with simple up/down programming for both sealing time and sealing temperature, the MiniSeal II also boasts a robust drawer design that ensures excellent conformance to health and safety regulations.

With so much available power, sealing times for most polypropylene plates with Porvair seals are less than 3 seconds each. When plate sealing operation is completed, plates are automatically ejected from the MiniSeal II.

MiniSeal II comes complete with plate adapters for standard SBS microplates, deep well microplates and PCR plates. The unused adapters are designed to stack on top of the unit when not in use. Also included is a brass plate weight to keep your foils and seals flat during sealing.

Porvair Miniseal II

Porviar Miniseal II
View as
Sort by