PEEKsil Tubing

IDEX PEEKsil Tubing

  • PEEK covered fused silica
  • 1/32" and 1/16" outside diameters with a wide variety of inside diameters
  • Precut to numerous standard lengths

PEEKsil's sheathing is mechanically strong and has ideal characteristics for sealing with many styles of fittings. The fused silica core provides a consistent and rigid fluid pathway with very tight tolerances and industry-accepted chemical properties. Together, this makes PEEKsil tubing ideal for numerous applications. In fact, PEEKsil can be used as a direct replacement for conventional stainless steel or PEEK tubing in many analytical systems. Like traditional fused silica tubing, PEEKsil has excellent chemical compatibility and extremely low adsorption characteristics, especially when compared with stainless steel.

Please Note: Do not cut this tubing. It should be used at its precut lengths because of permanent damage caused by cutters.

Tubing Specifications
  Stainless Steel Fused Silica PEEKsil
OD (Outer Diameter) 1/16" (1.55 mm)
1/8" (3.2 mm)		 0.0145" (360 µm) 1/32" (785 µm)
1/16" (1.55 mm)
ID (Inner Diameter) 0.004 - 0.080"
(100 µm - 2.0 mm)		 0.0008 - 0.006"
(20 - 150 µm)		 0.001 - 0.012"
(25 - 300 µm)
Operating Temp -41 - 289° C -51 - 100° C -51 - 100° C
Pressure Rating — — 10,000 PSI
(690 bar)
Typical Tolerances 0.001" for 1*16" OD tubing
0.003" for 1/8" OD tubing		 0.0004" 0.0004"
Refractive Index (clarity) Opaque 1.78 Opaque
pH Range 1-14 0-10 0-10
Sterilization Techniques Gamma irradiation;
ethylene oxide; thermal		 Ethylene oxide; thermal Ethylene oxide; thermal
Autoclavable? Yes Yes Yes